 |
|
|
|||||||
| Tech Zone Discussion Of Technical Related Issues Of Dirt Track Racing. |
 |
|
|
|
Thread Tools | Display Modes |
|
#1
08-02-2009, 02:58 PM
|
||||
|
||||
|
Setup wet slick track
WHAT IS A GOOD SETUP ON A WET SLICK TRACK?AS THE TRACK GETS DRY SLICK MY CAR IS GREAT BUT WHEN WE RACE FIRST THE TRACK IS WET AND SLICK AND I'M TIGHT IN THE MIDDLE AND A LITTLE LOOSE OFF THE CORNER.WHAT IS SOMETHING THAT WOULD HELP?WOULD A SOFTER RIGHT FRONT SPRING HELP?
Last edited by Leadfoot; 08-02-2009 at 06:12 PM. 
|
|
#2
11-05-2009, 11:05 PM
|
||||
|
||||
|
Re: Setup wet slick track
A little more stagger would definitely help the middle of the corner and the loose off may be because you have so much wheel in the corner to get it to turn in the middle. I would fix the middle then see what I had off. But as the track dries out you need to take the stagger back out of it. JMO
|
|
#3
11-05-2009, 11:29 PM
|
||||
|
||||
|
Re: Setup wet slick track
Maybe put a little more rear-steer to loosen it up for practice and take it out a little at a time as the track dries out until you get it where it is good back to where you like it on the dry-slick. Also, try dropping the air in your left rear. Maybe put a touch more brake in the left front.
__________________
The four most famous words in racing... Security To The Pits! #8 BACK IN BLACK
|
|
| Tags |
| setup, slick, track, wet |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
