3 Aces

 

Results 1 to 12 of 12

Thread: stock clip chassis set up

  1. #1
    Join Date
    01-13-2008
    Posts
    106
    Thanks
    15
    Thanked 1 Time in 1 Post

    stock clip chassis set up

    camaro clip car tube back half which front wheel leads car n the corner on dirt some say right and some say left and what weight springs n car 3 link rear coilovers
    Last edited by crzyctn; 10-02-2008 at 07:06 PM.

  2. #2
    Join Date
    12-23-2005
    Location
    G-spot
    Posts
    122
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: stock clip chassis set up

    if front tires are wider than rear right front.......if front tires are narrower than rear left front........in others words check the over all width of tires and wheels while on car when i built mine right front lead by an inch or so...and front tires were over all wider by 2 or 3 inches
    used less offset on front and more offset on rear.......think it was 3" on front 5" on rear

  3. #3
    Join Date
    01-13-2008
    Posts
    106
    Thanks
    15
    Thanked 1 Time in 1 Post

    Re: stock clip chassis set up

    thanks for the help which is a start from where ive been

  4. #4
    Join Date
    09-12-2007
    Location
    Dooms, Va
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: stock clip chassis set up

    on my three link car i sold last year we had the rf leadin, and ran 3 inch offset wheels on all 4 corners to widen the track of the car and allow it to get better bite. the springs we ran were about 550 or so on the lf 750 on the rf 225 on the lr and 200 to 225 on the rr...... i won 3 races my 2nd year and 3 races my 3rd year ever racing a car with the springs something similar to this, but i dunno how well you'd like it cause my dad didn't like it when he ran it but i loved it.
    Last edited by dbrown10jr; 10-16-2008 at 06:51 PM.

  5. #5
    Join Date
    01-13-2008
    Posts
    106
    Thanks
    15
    Thanked 1 Time in 1 Post

    Re: stock clip chassis set up

    thanks alot for the info any thoughts on weights car is 31oo pnds

  6. #6
    Join Date
    09-12-2007
    Location
    Dooms, Va
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: stock clip chassis set up

    w/o driver here are my numbers i had..... Left-53.2%, rear-55.7%, Cross-49.9%, right-46.8% 93lbs of bite
    with driver..... left-54.2, rear-56.2, cross-49.7, right-45.8.... 128 lbs of bite

    these numbers are with a 145 lb driver, and being down 6 gallons of fuel in a 22 gal fuel cell

  7. #7
    Join Date
    01-13-2008
    Posts
    106
    Thanks
    15
    Thanked 1 Time in 1 Post

    Re: stock clip chassis set up

    great info thats were i will try mine next week at fork mountain

  8. #8
    Join Date
    09-12-2007
    Location
    Dooms, Va
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: stock clip chassis set up

    i may be down there with a late model if my dad decides to run, ill let you know wether were goin or not probally on monday, my dad knows alot about them cars hes a 3 time track champ at eastside in the 3100 pound 3-link cars. ive got a stock clip 4-link now.

  9. #9
    Join Date
    01-13-2008
    Posts
    106
    Thanks
    15
    Thanked 1 Time in 1 Post

    Re: stock clip chassis set up

    sounds great to here some honest info from someone who nows thanks again guys

  10. #10
    Join Date
    09-12-2007
    Location
    Dooms, Va
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: stock clip chassis set up

    no problem, what class are you running in?

  11. #11
    Join Date
    01-13-2008
    Posts
    106
    Thanks
    15
    Thanked 1 Time in 1 Post

    Re: stock clip chassis set up

    superstreet 2 car

  12. #12
    Join Date
    09-12-2007
    Location
    Dooms, Va
    Posts
    42
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: stock clip chassis set up

    10-4 boss

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •