View Full Version : Bomber Rules
21PureStockV8
10-23-2005, 05:13 PM
Does anyone know exactly what the Carburetor Rule is in this class?I know it says must have a 2 barrel carb, but can it be a holley 500 or does it have to be a stock 2 barrel like a rochester or quadrajet?Someone mentioned that they had opened the rule up to as where you could run a four barrel.I want to run up there a couple times but i have a 4 barrel.Dont want to ride all the way up there and not get to run.So if anyone has any info i would appriciate it.Thanks in advance
wesleycogdell
10-23-2005, 10:25 PM
gary, their bomber class is pure stock at fayetteville.
Dwayne
10-24-2005, 07:37 AM
GENERAL
1. Radios allowed in this class.
2. Each driver will line up on the track as they have signed in. All laps count.
BODY
1. Any full size American made steel bodied car or camaro 106-inch wheel base minimum. No front wheel drive allowed.
2. 4-point roll cage recommended.
3. All parts must be factory for that make, model and year. All parts must be securely fastened.
4. All glass must be removed before entering track. Windshield is optional. Seat with seat belt and shoulder harness required. Recommended 5-point harness.
5. Stock floor pans, firewalls, trunk, etc. must be retained. Interior plastics, vinyl, carpet and flammable material must be removed.
6. Doors must be welded or chained shut. No modifying of the steering or suspension is allowed.
7. Numbers must be painted/decaled at least 18” high on both front doors and on roof. Roof numbers to read from driver’s side.
8. Fire extinguisher required.
9. Weight – 3450 lbs.
SUSPENSION
1. Suspension parts must remain stock.
2. No spacers of any kind allowed to alter stock suspension.
3. Caster and camber may be adjusted within factory ranges.
CARBURETOR
1. 2 Barrel only.
2. Cast iron 4-barrel intake allowed with adapters only (no spacer).
ENGINE
1. No cubic inch rule! Must remain 100% stock for that vehicle. No Exceptions.
2. May be bored .030. Make sure replacement pistons are identical (dimensions – weight-material).
3. Engine must mount in factory position.
4. Cam lifts 425 maximum.
5. Any hydraulic cam, stock rockers, stock diameter and height valve springs only.
6. Drive shaft must be painted white and have 2 loops.
7. Battery must be mounted under hood or trunk.
8. Standard headers permitted.
TRANSMISSION
1. Transmission must be stock for car. Lock rear ends optional.
WHEELS & TIRES
1. Goodyear Track Approved tires ONLY.
2. Any factory steel wheel maximum width 10”. May run larger wheel nuts
HERE (http://www.dublinspeedway.com/Rules_Page.htm)
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.