need some info on set of heads

[BadBoyScotty77]

Hello i just got a set of heads that are double hump heads that the first 3 numbers say 392. Has anyone ever heard of them or can tell me if they are a good set. Thanks Steven BadBoyScotty7738@aol.com

[DoubleNaught]

Try this web site:

http://www.mortec.com/castnum.htm

But you need the whole number to look it up correctly.

[BadBoyScotty77]

casting # is 3927186 Thanks

[DoubleNaught]

3927186....69-70...302/350......Camel hump,64cc chambers,accessory holes

[BadBoyScotty77]

thanks are they a good set of heads?

[gb81racing]

they are probably good enough to start out with until you get used to dirt track racing then probably a set of chevy vortec heads would be the best you can get for ps or ss

[BadBoyScotty77]

Thanks alot for the info

[gb81racing]

oh yea badboyscotty77. i think you are the one i seen on another site that has a helmet for sale or trade for chrome 10 inch rims. do you know what bolt pattern you want and how many are you lokking for?

[BadBoyScotty77]

This is my first time on dirt I raced asphalt for 17 years. All I know is I have a 85 montecarlo with a stock rear end in it right know but Im getting a ford 9in next week to put in it. I dont know whats the best off set on dirt is. I never raced a montecarlo so i dont even know the bolt pattern. Not tring to sound like I dont know what im doing. Im used to 4 cyl. mods. I need at least 4 wheels, all that came on the car is 8in wheels. So I dont have any 10in wheels. I might come in the pits at fms this weekend to just see whats going on. Thanks

[gb81racing]

ok well the ford 9 inch is probably 5 on 5 cause that is what my 9 inch is. i have 2 or 3 chrome 4 & 3/4 and 6 or more black 4 & 3/4 and some tires. i cannot run the 4 & 3/4 no more cause i changed my front end to 5 on 5 this winter.

[BadBoyScotty77]

What are you asking for them? I dont have any tires and wheels except 4 8in tires and wheels. Thanks

[gb81racing]

1 brand new rim ill take $50 and the other used ones 20 - 30 depending on newness. some of the tires we are not running any more you can have and some others you can have cheap

[BadBoyScotty77]

Ok thanks, im going to go check my 8in wheels and let you know. Can you email me a # where I call you. My name is Steven E-mail is BadBoyScotty7738@aol.com or you can call me at 910-257-5559

[gb81racing]

i just pm you

[BadBoyScotty77]

I have 5 on 4 1/2 front and back now on the car. I havent put ford rear end in yet. I might run the stock rear end for a race or two. So if you have any 5 on 4 1/2 let me know. But im still looking for 5on5 also.

[gb81racing]

measure from the outside of one hole then skip the next hole then measure to the middle of the next. is that what you did? if not your pattern is 4 and 3/4

[BadBoyScotty77]

It must be 4 and 3/4 I did center to center.