PDA

View Full Version : Whats the difference?


Desperado_03
01-12-2007, 12:36 PM
Whats the difference between a 305 that runs at a track weekly and one that is on the Virginia Sprint Series? or is there?

vms305
01-18-2007, 05:10 PM
wow theres lots of difference's,

weights, wing sliders, front wings,

Minimum weight with driver after race: 1560 # w/ steel wheels, 1600 # w aluminum wheels. When weighed before a race, all cars must exceed minimum weight by the weight of the fuel burned in that event. {Ex., a 25 lap feature burns 50 lbs. of fuel, therefore cars weighed before a 25 lap race must scale; 1610# steel, 1650# Aluminum} NO FUEL may be added after the race. Ballast weight must be between the front motor plate and 12“ behind the rear motor plate, and must be secured by a minimum of 3 - 3/8” dia. bolts. Cars without an on board fire system must carry an additional 25 lbs.

acsc rules are nation wide





www.ascsracing.com

MannyMoore
01-25-2007, 01:17 PM
Desperado, i thought you raced. ? you ,messin around? better get rid of them hollow bolts on your spindles. opperman gonna get you.
"If it won't fit- cut it up and store it under the house, til you get back from Ca."

alison
01-25-2007, 04:13 PM
wow good question, sorry I didn't know there was that BIG of a difference! Thanks~Alison~ *Learn something new everyday*

Opperman1
01-25-2007, 11:04 PM
Hollow bolts??? you git them at dog hollow or BR Motorsports? I used some on my dog pen gate , ain't seen them hounds since.
OPP

vms305
01-25-2007, 11:09 PM
are they going to seal the motors for us