View Full Version : 2007 Kart Rules
ShanghaiMike
12-12-2006, 09:28 AM
When will the 2007 kart rules be posted?
Will Devil Dennis Deaver race in the Enduro Class 2007?
:BustinAss:
Beetalbom
12-15-2006, 08:17 PM
When will the 2007 kart rules be posted?
Will Devil Dennis Deaver race in the Enduro Class 2007?
:BustinAss:It appears that Enduro class is ready for a level playing field.....maybe a restrictor plate........all 6.5 clone engines !:1219:
374lif
12-16-2006, 09:25 AM
I got a 98 dual rail trick that i ran in stock lite last year. Hooks up real good when the track is wet and tacky. and i have a 5 hp. hedgepeth racin engine that i would like to get rid of to. (the motor is apart because it needs new rings cause the last time i ran it flatend out)
31kart
12-17-2006, 12:36 AM
yea shanghai i vote restictor plate
31kart
12-17-2006, 12:38 AM
except for kart and driver over 425# that gives the big man a chance.
ShanghaiMike
12-18-2006, 06:07 AM
BUT ... restrictor plate are expensive... and you have to have a gage to check it... then you have to have a qualified technician.... can get complicated.... besides not so sure we can beat Devil Dennis with a level playing field!!!!
Would I be able to race an experimental electric kart in the Enduro class?
Sh Mike
shotgun
12-18-2006, 02:09 PM
yall karts are too expensive anyway anything u buy for a kart cost u a arm and a leg then the pay off aint crap for a kart I dont know how yall afford to race them.
31kart
12-18-2006, 07:57 PM
Shanghai we're not talking wka idiot rules your plenty qualified to caliper check a plate . They already exist for the animal the gold plate is .505 the black is .575 the clones would have to modify carb stud pattern to fit our engines in doing so the hole may not be exactly center so you could allow the animals to alter stud holes if they thought this was an advantage . Everybody wants to work on their engines the restrictor plate keeps those modifications from getting out of hand. If we are leveling the playing field can I run a cam with animal profile and use the PZ carb. then i'm in the 18's.I like the diversity of engines the plate tones down the animal carb which flows way more than ours.
Trick#17
12-18-2006, 08:18 PM
lol...shotgun...if u run the right places and money race then it aint that bad if u do good..
D8Dustin
12-18-2006, 08:58 PM
i think they need to have a run what u brug and hope u brug enough race one night:BustinAss:
ShanghaiMike
12-18-2006, 11:39 PM
So what would be a good size restrictor plate for Enduro Class?
SH Mike
374lif
12-19-2006, 05:12 PM
So what would be a good size restrictor plate for Enduro Class?
SH Mike
One as big as the damn Carb.
Restrict Plates are agrivatin as hell.:banghead:
D8Dustin
12-19-2006, 07:02 PM
So what would be a good size restrictor plate for Enduro Class?
SH Mike
just drill it as big as u can aint that rite cy lol
374lif
12-19-2006, 07:09 PM
yes sir.
31kart
12-19-2006, 07:21 PM
Mike the .505 gold plate animal is strong it out runs the flathead gold plate that is .575 . Another idea is to run a spec tillotson with a small ventura I think there is a gas version that has a .625 ventura but thats about the size we run now . The animal ventura is .792X.615 with no throttle shaft and butterfly thats a big advantage. What needs to happen everyone to agree on something or this becomes an open OHV class . I won 6 races with just gas and oil poured in my clone then the animals came . An air filter carb rejetting ignition advance .moved the stock cam timing . valve springs a good set of tires take 4 teeth off the rear we can run with the animals.I won on a junk margay with a tecumseh ohv one night.thats about $300.00 package thats what this class should be about , there's plenty of classes to spend lots of money in.
ShanghaiMike
12-21-2006, 04:38 AM
Sounds like the .505 might be the way to go... sure sounds like a simple solution.
Mike
Mike the .505 gold plate animal is strong it out runs the flathead gold plate that is .575 . Another idea is to run a spec tillotson with a small ventura I think there is a gas version that has a .625 ventura but thats about the size we run now . The animal ventura is .792X.615 with no throttle shaft and butterfly thats a big advantage. What needs to happen everyone to agree on something or this becomes an open OHV class . I won 6 races with just gas and oil poured in my clone then the animals came . An air filter carb rejetting ignition advance .moved the stock cam timing . valve springs a good set of tires take 4 teeth off the rear we can run with the animals.I won on a junk margay with a tecumseh ohv one night.thats about $300.00 package thats what this class should be about , there's plenty of classes to spend lots of money in.
D8Dustin
12-28-2006, 09:26 AM
hey, what classes are they gonna run this year
Beetalbom
01-25-2007, 12:57 PM
yea shanghai i vote restictor plate
YES !.......I believe restrictor plate would level the playing field in cart enduro class. Perfect tech rules do not exist for clones nor do tech tools exist..........(to the best of my knowdledge and belief..
In case of a desired challenge, the only thing need be checked is restrictor plate
:blue7:
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.